News Center

Your most assured of clean room engineering services

news center

Cosmetics - daily chemical clean production

Update:30 Nov 2018
Summary:

Cosmetics - daily chemical production enterprises shoul […]

Cosmetics - daily chemical production enterprises should in principle set up raw materials, production rooms, semi-finished products storage rooms, filling rooms, packaging rooms, container cleaning, disinfection, drying, storage, warehouse, inspection room, locker room, buffer zone, office Etc. to prevent cross-contamination.

Products that produce dust during the production of cosmetics or that use hazardous, flammable, and explosive materials must be used in separate production facilities.

The total area of production, filling and packaging shall not be less than 100 square meters, the per capita floor space shall not be less than 4 square meters, and the net height of the workshop shall not be less than 2.5 meters.

The floor of the production workshop should be smooth, wear-resistant, non-slip, non-toxic, non-seepage, easy to clean and disinfect. The surface of the work area that needs to be cleaned should have a slope, no water accumulation, and a clean floor drain at the lowest point.

In the production workshop using air purification device, the air inlet should be far away from the air outlet, and the air inlet should be no less than 2 meters away from the ground. There should be no pollution sources nearby. For UV disinfection, the intensity of the UV disinfection lamp shall not be less than 70 microwatts per square centimeter, and shall be set at 30 watts per 10 square meters and hoisted 2.0 meters above the ground.